Excavate foundation pit in softloose soil, not exceeding 1.5 m deep, 10 m2 on plan,Provide and lay

1. Published30 Oct 2026, 17:59
2. Bids close10 Nov 2026, 16:00
3. Bid opening11 Nov 2026, 16:00

Work description

vertical sides of pile caps, for concrete surfaces receiving subsequent covering, including supports, bracing and necessary staging. , Provide, erect, maintain and remove formwork to rectangular RCC columns, including staging, bracing and all supports, for rough concrete surfaces receiving granite finishes. , Provide, erect, maintain and remove formwork to beam sides and soffit, including adequately designed staging, bracing and all supports, for rough concrete surfaces receiving granite finishes. , Supply cut bend and fix Fe500D TMT bars 10 mm and above in pile caps columns and beams including binding and fixing. Pile main bars excluded and measured separately. , Supply, cut, bend and fix 8 mm TMT bars as column beam links, stirrups and cross ties , Build 230 mm thick curved brick crest above RCC beam using subclass B burnt clay bricks in cement mortar 1 4 including cutting bonding scaffolding and curing as per approved profile. , Supply and fix 20 mm polished granite on column faces in cement mortar 1 4 including cutting edge finishing and pointing Concealed faces and mechanical restraints excluded , Supply and fix 20 mm polished granite on beam sides soffit and top in cement mortar 1 4 including cutting edge finishing and pointing Masonry bearing and soffit restraints excluded , Supply and fix 12 mm polished granite veneer on both faces of brick crest in cement mortar 1 3 including profile cutting and pointing subject to schedule approval , Supply and fix 20 mm polished granite strips on curved brick crest including profile cutting edge finishing bedding and pointing with curved fabrication allowance. , Provide stainless steel anchors for elevated granite cladding and soffit including drilling approved fixings and installation as per approved design and actual details. , Carry out surface excavation in soft loose soil, average 240 mm deep and not exceeding 300 mm , Remove surplus soil from paving formation to an approved location within 50 m , Provide and lay 150 mm thick PCC 1 2 4 with 40 mm aggregate including base preparation compaction finishing curing and panel construction to approved levels and falls Cobble finish separate. , Supply and lay 60 mm sandstone cobbles over 30 mm mortar bedding 1 4 on PCC including cutting joint filling compaction curing and finishing to approved pattern and falls. , Supply and install carved sandstone cupola 4 ft high and 3.5 ft square , Supply and fix 12 W IP65 outdoor LED lights with driver brackets and connectors including connection and testing subject to approved model Point wiring separate. , Provide primary wiring for two light groups using 1.5 mm2 FRLS copper wires in PVC , Provide wiring for 18 additional light points using 1.5 mm2 FRLS copper wires in PVC conduit on existing switch circuit as per SSR scope. , Supply and fix 914.4 mm brass sun motif on crest including fabrication polishing , Provisional sum for brass lettering per pillar including fixing and protective coating Final text language size quantity thickness and design subject to approval , Provisional sum for 20 m electrical feeder weatherproof panel with MCB RCCB timer two GI plate earthing sets pits leads and accessories as per approved design Excludes utility charges , Provide 12 mm cement plaster in mortar 1 4 to columns beams and brick crest including surface preparation keying levelling and curing for granite fixing. Granite bedding separate. , Provide 12 mm cement plaster in mortar 1 4 to beam soffit including preparation staging levelling and curing as granite substrate with ceiling extra Granite anchors to engage structural concrete

Department of Defence has invited bids through Government e-Marketplace. Scope, estimated value, EMD and eligibility criteria are set out in the tender document on the source portal and are not published in the notice list.

Bid structure

Two cover, technical and financial

Performance guarantee

3% of contract value

Quoted from the notice inviting tender. These are the clauses a technical evaluation committee checks line by line, and a single lapsed certificate is enough to be rejected before your price is ever read.